CoolStream Duo Quick Start Guide

CoolStream Duo Quick Start Guide

CoolStream Duo manual cover model BTR 102Please read this instruction manual before operating the appliance, and save it for further reference.

Wirelessly stream music from your iPhone, iPad, or another Bluetooth-enabled device to either your 30-Pin docking station or to any home or car stereo that has a 3.5mm line-out jack. The CoolStream Duo offers 2 ways to bring Bluetooth to your audio equipment.

The CoolStream Duo also has 2 power options. It can be powered by the 30 Pin connector of a docking station or run on its built-in rechargeable battery. When the CoolStream Duo is plugged into a 30 Pin connector of a docking station or a 30 Pin charging cable. The red light indicates the battery is charging. The Duo is equipped with overcharge protection and can be left plugged into a cable or dock.

Product overview highlighting the top of the product.
Product Features

1. LED Indicator Light
The LED Table outlining the Duo's features and functions.

2. Battery On/Off Switch

    • slide switch to the left for the “ON” position to activate the battery
    • slide switch to the right for the “OFF” position to prevent the battery from draining

3. 3.5mm Line Out Jack

    • connect included line-in audio cable to home or car stereo with an auxiliary line-in jack
    • connect wired headphones/earphones

Diagram Front View

Rechargeable Battery and Bluetooth 4.1

Front view of Duo in black and white

 

Diagram Bottom View

30 Pin ConnectorCoolStream Duo Bottom View

 

Product Functions

Playing Music from a Docking Station via 30 Pin Connector

    1. Plug the CoolStream Duo into the 30 Pin connector of the docking station.
    2. Go to “Settings” on your mobile device and activate Bluetooth.
    3. Power on the docking station. The CoolStream Duo will automatically power on.
    4. Once “CoolStream Duo” appears on your mobile device, tap to pair.
    5. Play music from your mobile device.
    6. Please note that all docking stations do not support playback via the 30-pin connector.  If playback via the 30-pin connector is not working and the docking station has a 3.5 mm line-in jack, please follow the instructions below.

Playing Music from a Docking Station via 3.5mm Line-in Jack.

    1. Plug the CoolStream Duo into the 30 Pin connector of the docking station.  This will give power to the CoolStream Duo. (The battery switch on the top of the unit can be on or off.)
    2. Plug one end of the Line-out auxiliary audio cable (included with your Duo) into the 3.5mm jack at the top of the CoolStream Duo.
    3. Plug the other end of the Line-out auxiliary audio cable into the 3.5mm line-in jack of the docking station.  Click here for pictures and detailed instructions.
    4. Go to “Settings” on your mobile device and activate Bluetooth.
    5. Power on the docking station. The CoolStream Duo will automatically power on.
    6. Once “CoolStream Duo” appears on your mobile device, tap to pair.
    7. Play music from your mobile device.
Product Functions using Audio Jack on the top of the Duo.

Playing Music from Home or Car Stereo with a 3.5mm Line-in Jack

    1. For this function, you must charge the battery of the CoolStream Duo.  See instructions below.
    2. Plug one end of the Line-out auxiliary audio cable (included with your Duo) into the 3.5mm jack at the top of the CoolStream Duo.
    3. Plug the other end of the Line-out auxiliary audio cable into the 3.5mm line-in jack of the home or car stereo.
    4. Turn on the battery of the CoolStream Duo by sliding the power switch to the left (on) position.
    5. Go to “Settings” on your mobile device and activate Bluetooth.
    6. Once “CoolStream Duo” appears on your mobile device, tap to pair.
    7. Play music from your mobile device.

Playing Music with Wired Earphones (turn wired earphones in Bluetooth earphones)

    1. Plug the earphones (not included) into the 3.5mm jack at the top of the CoolStream Duo.
    2. Turn on the battery of the CoolStream Duo. Slide the battery switch to the left (on) position.
    3. Go to “Settings” on your mobile device and activate Bluetooth.
    4. Once “CoolStream Duo” appears on your mobile device, tap to pair.
    5. Play music from your mobile device.
Multipoint Function – 2 devices paired at the same time.
    1. Power on CoolStream Duo by either plugging it into a docking station or turning on the built-in battery (see instructions above).
    2. Pair first mobile devices to CoolStream Duo (see instructions above).
    3. Turn off the Bluetooth function of the first mobile device under Settings.
    4. Pair a second mobile device to CoolStream Duo. (see instructions above).
    5. Turn on the Bluetooth function of the first mobile device.  CoolStream Duo should appear and automatically connect.

Charging the Battery

Immediately after purchasing your CoolStream Duo, charging the battery for 3 hours is recommended.

To charge the battery of the CoolStream Duo, plug it into either a 30 Pin docking station or a 30 Pin charging cable.  The battery switch can be in either the on or off position for charging.

The battery of the CoolStream Duo supports continuous playback for 5 hours.

Product Specifications
    • Bluetooth 4.1 with Multipoint Technology
    • Supports A2DP and AAC audio codec
    • Bluetooth range up to 30 feet
    • Rechargeable Lithium battery support of to 5 hours playtime
    • 3.5mm Jack support connection to home and car stereos with 3.5mm line-in jack
    • 3.5mm jack supports connection to wired earphones
    • Automatic detection of 5V or 12V power supply
    • Recommended operating temperature 32F – 95F

If you need further assistance, please click here to contact CoolStream Customer Service.

Exeter Science & Entertainment warrants this product against defects in material or workmanship for one year.